Search
Menu Close

LED

View as Grid List
Sort by
Display per page

Astera - LED 8 Tube Helios Kit 2’

· Astera FP1 Helios 8 Light Kit · 8 of the Helios Tubes · Charging Case · Power Box · Extension Cable (5 ft) · Charger cord bundle Mini cord · 16 x Silver Holders · 16 Pins (Attached to Silver Holder) · 8 x Floor Stands · 16 x Eyebolt · 16 x BLT Spigot (3/8" & 1/4" -20 threads) · 2 x Divider Foam Optical Colors: Red, Green, Blue, Mint, Amber Total LED power: 36W Maximum power draw: 24W TLCI: ≥96 CRI: ≥96 Luminous flux: 1340Lm Emittance @1m: 393Lx Strobe: 0-25Hz Beam Angle: 120˚ Field Angle: 180˚ Pixels: 8 \ Electrical Battery: LG Chem Lithium-ion Battery Lifetime: 70% after 300 cycles Battery Runtime: Up to 20 hours LED Lifetime: 50.000 Hours Charging time (nominal): 3 Hours Input Voltage : 24V 1.25A
$300.00 per 1 day(s)

Astera - LightSock 40 4' ASTERA TUBES

Made for ASTERA TITAN TUBE Length: 41.25 INCHES (104.7 CENTIMETERS) Width: 7 INCHES (17.7 CENTIMETERS) Weight: 4.5 POUNDS (2.04 KILOGRAMS) including Tube
$30.00 per 1 day(s)

Astera- Clips (Titan Tube)

$7.50 per 1 day(s)

Astera LED 8 Tube Titan Kit

The Astera LED Titan Tube provides 72 watts of ultra high TLCI flicker-free light, perfect for film, video and photo production. 16 pixel segments, 180 degree beam angle, IR, App controlled, wired and wireless (CRMX) DMX and built-in rechargeable LG battery. Plus green / minus green control. The Titan will run up to 10-15 hours on battery power with a 3 hr re-charge time. Tunable white color range from 1,750K to 20,000K TruColor Calibration: Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels. Emergency Lights: Switches to white light when AC power is cut to keep your event save. - 8 Tubes - 1 Power Box - 8 Extension Cables - 1 Charger Cord Bundle - 16 Silver Holders - 8 Fl Stands - 16 Eye Bolts - 16 BLT Spigot - 1 remote - 1 Divider Foam
$400.00 per 1 day(s)

Astera- Stand (Titan)

$5.00 per 1 day(s)

Chimera - ARRI Orbiter Octa 4 Grid 40 Degree

The SnapGrid for the Octa 4 by DoPchoice attaches to the front of the Orbiter and SkyPanel Octa 4 and provides directional light control. The SnapGrid attaches to the DoPchoice Octa 4 and easily folds away for storage. Provides directional light control Approx. 40° half peak angle (HPA) No mounting hardware required.
$45.00 per 1 day(s)

LED - ARRI Orbiter OF Optic Kit (3 Optics)

15, 30, 60 deg 2 - Barndoors 1 - Case
$75.00 per 1 day(s)

LED - 1x1 Astra 6X Bi-Color By Litepanels

The Astra 6X has an impressive output that rates among the highest of LED panels. It is now 50% brighter than the first generation Astra and 6 times brighter than the original 1x1. This higher intensity results in a longer throw and illuminates a wider area, allowing the panel to compete with strong exterior light sources or illuminate a large area effectively with just a single fixture. Astra 6X Features: - Flexible, modular concept - Optional communications module allows the brightness, color temperature, and cooling mode to be controlled via DMX or Bluetooth - Optional yoke mounted Gold Mount or V-Mount battery plates - Field replaceable fan module and external power supply - Dimming from 100% to 0 with no color shift - Flicker-free at any frame rate or shutter angle - End cap exhaust vents angle downward to direct air flow away from the fixture and help prevent foreign material from entering - Durable, industry standard 3-pin XLR locking power connector - Yoke mounted power supply and optional battery plates with dual integrated cable guides
$80.00 per 1 day(s)

LED - 1x1 Astra Bi-Color By Litepanels

Litepanels Astra 1x1 Bi-Color - Can be ran as a plugged in unit or via rechargeable Block Battery. - 110W Power at Max power draw - Comparable ouput of a 2000W softlight.
$75.00 per 1 day(s)

LED - 1x1 Gemini 1x1 Soft RGBWW by Litepanels

Litepanels Gemini 1x1 Bi-Color LED Softpanel Power consumption; 200W AC Input: 100 to 240 VAC, 50 / 60 Hz 4 Pin XLR 2700 to 10,000K Weight: 17lbs Dimensions: 12.6 x 12.6 x 4.6" / 32.0 x 32.0 x 11.7 cm
$150.00 per 1 day(s)

LED - 1x1 Light Panel Softbox

This Universal LED TECH Lightbank from Chimera is a frameless lightbank designed to work with most 1 x 1' LED panel lights on the market. The lens screen blends the individual point sources of LED light into one smooth, soft light source that eliminates micro shadows and provides directional control. Optional diffusers and a grid are available as well.
$20.00 per 1 day(s)

LED - 4”X 6” Bi-Color By Dracast

4" x 6" Dracast LED160 B-Color Adjustable from Tungsten to Daylight lighting Mounts on Camera
$30.00 per 1 day(s)

LED - Amaran P60c Bi-Color Soft Panel Light

The Amaran P60X Bi-Color Soft Panel Light puts control at the center of its design to bring you the utmost creative power. The well-consrtructed fixture features a softbox with grid, NP-F battery plate, variable color temperature of 3200-6500k, sidius link control, 4 special FX, AC or battery, and dimming of 0-100%. The Amaran P60x Bi-Color Soft Panel Light is a bi-color Lensed LED Panel with 60W of intense output and is part of the newest generation of Amaran LED panels. The P60x builds upon many of the existing features of previous Amaran panels, including battery power & charging and compact form factor, then upgrades them with an expanded bi-color CCT range, increased durability, and Sidus Link App control. The P60x and P60c usher in a new generation of lighting for creators of all types by combining features to make them the best-LED panels in their class. Utilizing its 60W LED Output, with 78W max power draw, the Amaran P60x is capable of outputting 5,070 lux at 1 meter (5600K) due to its optical design, which gives it a 45° beam angle. Inside its compact form factor lies the ability to compete with difficult lighting conditions to make your subject shine. The Amaran P60x uses a unique led configuration that creates more organic shadows and minimizes the obvious multi-shadow effects from LEDs arranged in a strict grid pattern.
$75.00 per 1 day(s)

LED - Aputure - 3 Reflector Kit for CS15/XT26 - ___Narrow, ___Regular, ___Wide, ___Case

This Reflector Kit from Aputure is designed for their Electro Storm CS15 and XT26 lights to help you control and focus the beam spread of your light to create your desired effect. The kit includes both the narrow and medium-angle reflectors. Aputure Narrow Angle Reflector for CS15/XT26 This Narrow Angle Reflector from Aputure is designed for their Electro Storm CS15 and XT26 lights to help you control and focus the beam spread of your light to create your desired effect. Aputure Wide Angle Reflector for CS15/XT26 This Wide Angle Reflector from Aputure is designed for their Electro Storm CS15 and XT26 lights to help you control and focus the beam spread of your light to create your desired effect.
$50.00 per 1 day(s)

LED - Aputure 25’ EXTRA LONG Head Ext - 600D

25’ Extension Cable for Aputure 600D
$10.00 per 1 day(s)

LED - Aputure 300D Fresnel 2X ONLY

The Fresnel 2x design features dual optical intensifying elements, a large 5.5” front Fresnel lens, improved ventilation, and the elimination of light leaks, making this the ultimate Bowens Mount Fresnel. Spreads Beam 12 to 40 degrees. Fits C120D and C300D lights only
$30.00 per 1 day(s)

LED - Aputure 90 Lantern 36”

$20.00 per 1 day(s)

LED - Aputure Barndoor LS 300D

Fits the Aputure 300 LED Light
$12.00 per 1 day(s)

LED - Aputure Barndoor LS 600D

Includes Barndoors for 10” Fresnel. - Can fit on front of light OR Front of Fresnel
$15.00 per 1 day(s)

LED - Aputure CS15 RGB Color

The full-color LED chipset goes just beyond 1500W of power output that rivals industry-standard 1800W HMIs, providing expanded color controls across its broad 2000 to 10,000K CCT range. It also offers green-magenta adjustment and impressive coverage of over 90% of colors within the Rec. 2020 color space. The dual-blue LED chipset design allows the light to achieve broad spectral reproduction, boasting an SSI of daylight and tungsten at 86 and 89, respectively. This ensures industry-leading color quality in all shooting environments. The CS15 outputs up to 32,600 lux at a distance of 9.8' using its included 35° reflector. For Studio & Film/TV Production Output: 32,600 Lux at 9.8' w/ Reflector 2000-10,000K CCT; Full RGB Color Control AC or Battery Power Onboard, DMX & App Control Art-Net, sACN & LumenRadio CRMX Control SSI (D56) 86 | SSI (Tungsten) 89 Advanced Liquid-Cooling, IP65 Rated Electronic A-Mount, Bowens S Mount Includes 35° Reflector & Control Box
$350.00 per 1 day(s)

LED - Aputure F10 Fresnel - 600 D C X

Aputure F10 Fresnel 10” Fresnel Fits Aputure 600 Lights Bowens Mount Up to 200,000 lux @ 3.28' with the Aputure LS 600d 15 to 45° variable beam angle 10" Glass Fresnel lens Dual lens optical design Seamless focus adjustment Minimizes light leaks
$30.00 per 1 day(s)

LED - Aputure F14 Fresnel - CS15 or XT26

For A-Mount Point-Source Fixtures CS15 or XT26 14" A-Mount Motorized Fresnel Modifier 18º to 40º Adjustable Beam Angle Power and Data Transfer Automatic Calibration DMX and Sidus Link2 Control Display Screen and Control Knob Weather-Resistant Design
$80.00 per 1 day(s)

LED - Aputure Lantern 26”

$20.00 per 1 day(s)

LED - Aputure Lens - Spotlight MAX 50 Deg LENS

For Spotlight Max Mount 50 Degree Even Edge-to-Edge Light Distribution
$35.00 per 1 day(s)

LED - Aputure Lens - Spotlight MAX 19 Deg LENS

For Spotlight Max Mount 19 Degree Even Edge-to-Edge Light Distribution
$35.00 per 1 day(s)

LED - Aputure Lens - Spotlight MAX 36 Deg LENS

For Spotlight Max Mount 36 Degree Even Edge-to-Edge Light Distribution
$35.00 per 1 day(s)

LED - Aputure Light Dome 150 Softbox

The Aputure Light Dome 150 Softbox is a 150cm (59in) Bowens Mount Quick-Setup Circular Softbox. Its substantial surface area makes it ideal for high-powered Bowens Mount LEDs, such as the Aputure LS 600d Pro or LS 600x Pro. Its 32-sided quick-setup build transforms a hard point-source light into a soft source with perfectly circular reflections in one minute. The Light Dome 150 also includes two diffusion strengths to allow users to fine tune their intensity and light quality. 150cm (4.9ft) Bowens Mount Circular Softbox 80cm (31.5in) Depth Incredibly Soft Light Quality 32-Sided Design for Perfect Circular Reflections Quick-Setup Build for Efficient Workflows 2 Types of Front Diffusion (1.5 Stop & 2.5 Stop) 1 x 45° Fabric Light Control Grid Includes Carrying Bag 3.32kg (7.32lbs) Weight
$35.00 per 1 day(s)

LED - Aputure Light OctaDome 120

The Light OctaDome 120 Bowens Mount Octagonal Softbox from Aputure has eight sides to transform any point source Bowens-mount light fixture into an ultrasoft area light, blanketing your subject or set in diffused light. It has a large 47" diameter and two front diffusers, plus an inner baffle to allow you to fine-tune intensity and light quality.
$30.00 per 1 day(s)

LED - Aputure LS 300X (V-mount)

2700-6500K Tunable White Point Bowens-S Mount Compatible with Lensed Optical Modifiers (e.g., Fresnel 2X, Spotlight) Up to 56,000+ lux with the Fresnel 2X CRI & TLCI scores of 95+ SSI Scores Higher Than The Industry Standard. Tungsten SSI: 85; D55 SSI: 74 Smooth 0%-100% Dimming Control Preset Button to Toggle Between Common CCT Presets (2700K, 3200K, 4300K, 5500K, 6500K) 4 Dimming Curves: Linear, Exponential, Logarithmic, & S-Curve All-in-One Silent Control Box Neutrik-Locking Connector Single Battery (50%) or Dual Battery (100%) Operation Firmware Upgradeable 9 Built-in FX w/ CCT Control: Paparazzi, Strobe, Lightning, Faulty Bulb, TV, Pulsing, Fireworks, Explosion, & Fire Handbrake Locking Yoke with 360 Degree Rotation 55 Degree Hyper Reflector for Increased Output Quick Release "Lightning Clamp" Included Durable Carrying Case Supports up to 100kg User Presets available via App Control DMX512 Compatible Sidus Mesh Technology Compatible with Sidus Link App & 2.4Ghz Remote
$100.00 per 1 day(s)

LED - Aputure LS 600C Pro Color (V-mount)

A powerful point-source light that can easily mount a wide range of accessories, the Aputure LS 600c Pro is a variable color temperature light fixture built with color accuracy at the forefront of its design. Its 2300 to 10,000K color temperature range allows you to use it on interiors, exteriors, and mixed lighting environments. In addition, the LS 600c Pro features fully tunable RGB color with high CRI, TLCI, and SSI ratings. It has adjustable frequency selection to reduce flicker and can be powered by an optional 48V battery or AC power. The fixture features a V-mount multi-voltage battery plate, and it will run at half power using 14.4V/15A, 26V/8.5A, or 28.8V/7.5A batteries. Featuring a universal Bowens mount, you can use a variety of readily available accessories to control and shape the output. The fixture has 15 lighting effects and four dimming curves to give you precise control. Make adjustments using a downloadable Sidus App, LumenRadio CRMX, or ART-net via the built in etherCON connectors, and DMX via 5-pin XLR.
$200.00 per 1 day(s)

LED - Aputure LS 600D Pro Daylight (V-mount)

The Aputure LS 600d Pro Daylight LED V-Mount Kit is a powerful lighting kit that provides precision color accuracy at a fixed 5600K with a high CRI rating of 96. Key features include: Single-point LED with a impressive output; 98,500 Lux at 3.28’ 105-degree beam angle & CRI 96 rating Attached yoke with 5/8-inch receiver Wireless remote provides control from up to 328 feet
$150.00 per 1 day(s)

LED - Aputure LS 60X

60W Expanded Bi-Color Adjustable Focusing LED Custom Aspherical Optics: Adjustable 15º-45º Spot-Flood Beam Angle Weather-Resistant Design, compatible with Spotlight Mini Zoom & LS 60 Softbox Versatile Power Options: AC Power & D-Tap Battery Operable Included 8-Leaf Barndoors & Bowens Mount Adapter
$45.00 per 1 day(s)

LED - Aputure LS C 300D Mark II (V-mount)

The Aputure LS C300d II LED V-Mount Kit is a high-CRI bicolor LED ranging from 5500K with 3500 lux at 9.8’. Bright 3500 lux single-point LED with 5500-degree color temperature 55-degree beam angle & CRI 96 rating Attached yoke with 5/8-inch receiver Wireless remote provides control from up to 328 feet
$75.00 per 1 day(s)

LED - Aputure MC LED RGBWW - 12 Light Kit

Includes Custom Accessory Drawer Charging Case Features 12 Wireless Charging Pads & 3 USB 5V/2A Ports Accepts AC Power or 12V DC Power via D-Tap 17.19 x 15.11 x 5.31in 12 - lights 1 - charger 5 - cables 4 - mounts 4 - thread adaptors 4 - diffusers 1 - case
$100.00 per 1 day(s)

LED - Aputure NOVA P300C Kit

The Aputure P300C Nova Light Panel is a 300W RGBWW LED Soft Light, and is also the first product in Aputure “Nova” Professional LED Panel product line. By utilizing a unique RGBWW chipset, the Nova is able to strike a balance between intense output, and precision color quality, capable of producing 9,000+lux at 1 meter (5500K) with a CCT range of 2,000K-10,000K. The Nova P300c also features an extendable, easy-to-use handheld control box, so you can mount it the light or on your stand, for instant accessibility no matter what environment you use the fixture in. As an Aputure product, the P300c also is compatible with the free Sidus Link mobile app control, allowing you to control and unlock new features even if your light is out of arms reach. The Nova P300c Kit includes a custom hard shell rolling case for the fixture, allowing it to withstand even the toughest filmset environments.
$200.00 per 1 day(s)

LED - Aputure NOVA P600C Kit

This updated LED soft light panel provides twice the brightness of the P300c with twice the number of light engines, producing a massive 2298 Lux at 9.8' in 6500K CCT mode. It also features 19 lighting effects and a new control box with wired support for DMX512 and wireless support for LumenRadio CRMX and the Sidus Link smartphone app. This kit includes a wheeled hard-shell case to fit the light, control box, cables, and accessories. The Nova 600c provides the same professional features as the P300c such as an expansive color temperature of 2000 to 10,000K, an impressive CRI/TLCI rating of 95+, plus/minus green control, dimming from 0.1 to 100% without flicker or color shift, and HSI mode that allows you to adjust the hue, saturation, and intensity giving you access to millions of custom colors. It also features a 300+ industry-standard gel library for even greater chromatic control. Its 19 special effects include Cop Car, Lightning, Paparazzi, Candle, and Fire. It also features a removable diffusion panel, maximum and constant output modes, and four user-programmable presets. 1 - Power cord 1 - head extension 1 - clamp 0 - remotes 1 - case
$250.00 per 1 day(s)

LED - Aputure Spotlight MAX Mount

For 600/2600W Bowens Fixtures Works with LS 600 Series/LS 1200d Pro Works with Electro Storm Fixtures Even Edge-to-Edge Light Distribution
$50.00 per 1 day(s)

LED - Aputure XT26 Bi-Color

Designed with power and durability for film and television professionals, the Electro Storm XT26 Bi-Color LED Monolight from Aputure is a bi-color point-source fixture offering 2600W of dynamic white CCT from 2700 to 6500K and tint control, dual accessory mounts, advanced connectivity options, and a rugged IP65 dust and weather resistant construction to withstand demanding filming environments. The XT26's innovative electronic modifiers provide enhanced optimization and motorized control. This XT26 version comes with a US plug. For Studio & Film/TV Production Output: 65,200 Lux at 9.8' w/ Reflector 2700-6500K CCT -MUST HAVE 60AMP BATES DISTRIBUTION Onboard, DMX & App Control Art-Net, sACN & LumenRadio CRMX Control CRI 98 | TLCI 98 | SSI 74/85 Advanced Liquid-Cooling, IP65 Rated Electronic A-Mount, Bowens S Mount
$400.00 per 1 day(s)

LED - ARRI L10-C

400 watt power draw 2k tungsten output 2800-10,000K Variable Color Control 10" Lens Focusable from 15 to 50 Degrees Full -Green to Full +Green Control CRI: 95, TLCI: 91 Onboard DMX, 0-100% Dimmable Multi-Speed Fan Cooled, On/Off Control Multi-Voltage: 100-250 VAC, 50/60 Hz Low 400W Power Consumption, High Output Lens diameter: 10" / 274 mm Weight: 43.4 lb / 19.7 kg
$180.00 per 1 day(s)

LED - ARRI L5-C

The L5 is approximately 45% brighter than a 300 watt tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size. Fully Tuneable from 2,800 K - 10,000 K Plus/Minusgreen correction Vibrate Color Selection (RGB+W Color Gamut) Hue and Saturation Control High Color Rendering Low Power Consumption (115 W Nominal) Fully Dimmable Lightweight and Compact True Fresnel Lens Light Characteristics On-Board Battery Connection (23 - 36V DC) Onboard DMX In and Out RDM Implementation USB Mini Connection for Firmware Updates Available in Blue/Silver Fan Mode Selection powerCON TRUE1 Power Connector
$65.00 per 1 day(s)

LED - ARRI L7-C

- LE2: 25% Brighter than previous L7-C - Beam Angle: 15 - 50 Degrees - 7" Fresnel Lens - 2800 - 10,000K, Continuously Variable - Full RGB+W Color Gamut - Runs with or without Fan - DMX Control, On-Board Control - Low Electrical Draw: 160W
$80.00 per 1 day(s)

LED - ARRI Orbiter

The ARRI Orbiter LED Light is part of a tunable light system with a powerful color engine and versatile, changeable optics. ARRI's Spectra system features a wide range of color features allowing you to create an enormous range of colors with its six-color light engine, The light runs on universal 100 to 260V but it will also run on 48V batteries when AC power is unavailable.
$180.00 per 1 day(s)

LED - ARRI Orbiter Docking Ring w/ Leko Barrel

The Orbiter Docking Ring allows the attachment of a wide range of compatible optics from various manufacturers: different Projection optics, Fresnel and Cyc-optics. USE TO CONNECT to LEKO LENS Options We do include in the Leko Barrel
$45.00 per 1 day(s)

LED - ARRI Orbiter Fresnel Lens 15 - 65 DEG

The Fresnel lighting character works best with a large aperture and a wide zoom range. Despite its large aperture. The Orbiter Fresnel lens housing is compact (approx. 340 mm x 380 mm x 370 mm / 13.4 in x 15 in x 14.6 in) (~ 4.5 kg / 9.5 lbs). Its lens diameter of 285 mm / 11.2 in equals that of the True Blue ST2/3 and T5. The large zoom range of 15 to 65° is fully motorized and can be precisely positioned while being controlled locally via Orbiter’s Control Panel or remotely by DMX/RDM or IP based (ArtNet or sACN).
$80.00 per 1 day(s)

LED - ARRI Skypanel S30

- Panel Surface Area: 14 x 11.8" - 110° Beam Spread - Color Temperature from 2800-10,000K - Full Gamut Color Mixing - Hue and Saturation Control - Full Minus to Full Plusgreen - 0-100% Dimming, DMX Control
$120.00 per 1 day(s)

LED - ARRI Skypanel S360 Kit - Deluxe

SkyPanel S360-C and Case 50.4 x 34.4" Panel Surface Area Yoke Short Yoke Power Supply, Edison Cable SkyPanel Wired Remote Standard, Lite, Heavy Diffusers Light Intensifier 30 and 60° Honeycomb Grids Super Clamp Adapter
$500.00 per 1 day(s)

LED - Arri Skypanel S360 Kit - Standard

Surface area of the S360-C is 5.8 times larger than the S60 and produces beautiful soft light in a wide 105º beam angle. Features a full RGB+W color gamut with hue and saturation control and full plus/minus green control. Weight: 96lbs Tilt: +/- 90 degrees Power Consumption: 1500w Dimming: 0-100%
$400.00 per 1 day(s)

LED - Astera AX5 Triple PAR - Battery Powered

Colors: RGBAW Philips Lumileds CRI: 92 Strobe: 0-25Hz Beam Angle: 13° Pixels: 1 Battery Runtime: Up to 20 hours LED Lifetime: 50,000 hours IP Rating: IP65 Includes (1) Flood Filter & (1) Wall-Wash Filter, (1) Case, (1) Power Cord
$40.00 per 1 day(s)

LED - Dedolight DLED7 Bi-Color 3-Light Kit

(3) DLED7-D Dedolight focusing LED light head · (3) DMX Power supply for DLED7 LED light heads · (3) DPLS Light shield rings · (3) DBD8 Standard barn door (eight leaves) · (2) DLSR70 Speedrings · (2) DSBSXS Mini soft box 30x30x23cm (12”x12”x9”) · (2) DLGRIDXS Grid (40Deg), fits mini soft box · (1) DP1.1 Imager projection attachment · (1) DPGH Steel gobo holder · (1) DPGSET Gobo set (six popular steel gobos 77215, 77504, 77721, 77732, 77739, 77703) · (3) DFH Gel filter holder · (1) DGW Gel filter set, warm tone · (1) DGMD Gel filter set, mixed diffusion · (1) DGCOL Gel filter set, color effect · (3) DFX glasses Three structure glass filters with holder · (2) Accessory pouch · (1) dedolight clamp · (3) dedolight stands · 1 Hard case with handle and wheels
$300.00 per 1 day(s)

LED - Fiilex K151 Kit (Q500 Light)D

Includes: 1 x Q500 LED Light 1 x Barndoor 1 x 5" Fresnel Lens 1 x 20' PowerCon Cable 1 x Dome Difusser 1 x Hard Case
$60.00 per 1 day(s)

LED - Fiilex K301 3 Light Kit

Includes: 3 x P360 Light Heads 3 x Barndoors 3 x AC/DC Power Adapter 1 x Softbox 15" x 15" 1 X Speedring for Softbox 3 x Light stand 3 x Dome Diffuser Rolling Travel case
$75.00 per 1 day(s)

LED - Fiilex P100 4 Light Kit

Great on the go, travel lighting kit. Each light has it's own built in battery allowing maximum flexibility. 4 x P100 (400w Total Output, Color temp range from 3000 to 5600k) 4 x Li-ion/Rechargeable Battery 2 x AC/DC Power Adapters 1 x Half Yoke 2 x Dome Diffuser 2 x Cold Shoe w/ Mini Ball Head 2 x P100 Accessory Mount 1 x Carrying Travel Case
$75.00 per 1 day(s)

LED - Fiilex P100 Single Light Only

- Variable Color Temperature: 3000-5600K - 26 - 50° Adjustable Beam Angle - 0 to 100% Dimming - Multi-Voltage AC Adapter
$20.00 per 1 day(s)

LED - Fiilex Q1000

Includes: 1 x Q1000 LED Light 1 x Barndoor 1 x 5" Fresnel Lens 1 x 20' PowerCon Cable 1 x Dome Difusser 1 x Hard Case
$100.00 per 1 day(s)

LED - LEDGO Ring Light Lg-R320c

- 12" Shoot-Through Diameter - Flood 120° Beam Angle - Color Temperature Control: 3200-5600K - TLCI 95 and CRI 96 - Built-In Dual Handles - 1/4"-20 Mount and Included 5/8" Adapter - Camera Mount Plate with 15mm Rails - Accepts 2 x Sony L-Series Batteries - 100-240 VAC or 15 VDC - Integrated USB Charging Port - Lumens: 4373 - Fixture Weight: 3.53 lb / 1.6 kg
$30.00 per 1 day(s)

LED - Manfrotto Lykos Bi-Color

Manfrotto LYKOS Bi-Color LED Light - Designed by Litepanels - 1 x LYKOS Bi-Color Panel 3000k to 5600k range , 43 LEDs total - 1 x Custom P Tap power cable (7 ft) - 1 x AC Power Adapter - Tripod, Hot-shoe, Ball-head - Battery Option Available
$30.00 per 1 day(s)

LED - Pixelbrick - 8 Light Kit

$150.00 per 1 day(s)

LED - Quasar Q-Lion 3x3 Battery Kit

LED - Quasar Q-Lion 3x3 Battery Kit Includes: 3 - Q20LS 24" Q-Lion Battery LEDs 3 - Q10LS 12" Q-Lion Battery LEDs 3 - Q5LS 5" Q-Lion Battery LEDs 2 - Q-Lion 3.0 Multi Charger 9 - Single Chargers 9 - Battery LED Baby Pins 1 - Custom SKB Case and Foam
$150.00 per 1 day(s)

LED - S2 Litemat 1 Hybrid Kit PLUS

LiteGear S2 LiteMat 1 Hybrid Kit Includes: - LiteMat Diffuser with 3 diffusions (Quarter, Half, and Full) - LiteDimmer Pro Hybrid - PolySkirt - Parasquare Louver - Center mount - KitBag 1 - ballast 1 - head extension 1 - power ballast 3 - diffusions 1 - power cord 1 - mount 1 - speedring 1 - grid - Highly portable and extremely lightweight - Bi-Color (Daylight,Tungsten, or Mid) - 50 watts / 4 Amps - 21" X 12" x 1" - 2.3 lbs - Total LEDs: 288
$60.00 per 1 day(s)

LED - S2 Litemat 2 Hybrid Kit PLUS

The LiteGear LiteMat 2 LED Hybrid Complete Unit Kit - Daylight or Tungsten and anywhere in between for a beautiful color match. - Flicker free dimming and variable color temperature for the ultimate control. - Measures 40" x 21" for a large soft source - A filmmaker's or photographer's dream light. 1 - ballast 1 - head extension 1 - power ballast 3 - diffusions 1 - power cord 1 - mount 1 - speedring 1 - grid Includes: - LiteMat Diffuser with 3 difussions (Quarter, Half, and Full) - LiteDimmer Pro Hybrid - PolySkirt - Parasquare Louver - Center mount - KitBag
$90.00 per 1 day(s)

LED - S2 LiteMat 2L Hybrid Kit PLUS

The LiteGear LiteMat 2L LED Hybrid Complete Unit Kit - Daylight or Tungsten and anywhere in between for a beautiful color match. - Flicker free dimming and variable color temperature for the ultimate control. - A filmmaker's or photographer's dream light. 1 - ballast 1 - head extension 1 - power ballast 3 - diffusions 1 - power cord 1 - mount 1 - speedring 1 - grid Includes: - LiteMat Diffuser with 3 difussions (Quarter, Half, and Full) - LiteDimmer Pro Hybrid - PolySkirt - Parasquare Louver - Center mount - KitBag
$100.00 per 1 day(s)

LED - S2 Litemat 4 Hybrid Kit PLUS

The LiteGear LiteMat 4 LED Hybrid Complete Unit Kit - Daylight or Tungsten and anywhere in between for a beautiful color match. - Flicker free dimming and variable color temperature for the ultimate control. - Measures 40" x 21" for a large soft source - A filmmaker's or photographer's dream light. 1 - ballast 1 - head extension 1 - power ballast 3 - diffusions 1 - power cord 1 - mount 1 - speedring 1 - grid Includes: - LiteMat Diffuser with 3 difussions (Quarter, Half, and Full) - LiteDimmer Pro Hybrid - PolySkirt - Parasquare Louver - Center mount - KitBag
$120.00 per 1 day(s)

LED - S2 Litemat 8 Hybrid Kit PLUS

LiteGear- S2 LiteMat 8 PLUS Hybrid Kit Includes: - LiteMat Diffuser with 3 diffusions (Quarter, Half, and Full) - LiteDimmer+ Plus AC400 Duo Dimmer -DMX connections and Wireless DMX Lumen Radio - Polyskirt - Center mount - KitBag - 40" X 40" x 1" - 6 lbs - Total LEDs: 4608 - Highly portable and extremely lightweight - Bi-Color (Daylight, Tungsten, or Mid) - 400 watts / 16.67 Amps
$225.00 per 1 day(s)

LED - SOFTBOX for Aputure Nova P300C

70x50cm Rectangular Softbox for LED Panels (approx. 27.5x20in.) Compatible with the Nova P300c Softbox Brack Fits Seamlessly into Nova P300c Accessory Slot Includes 1⁄4 Grid Diffusion Sheet Includes 40° Fabric Light Control Grid Includes Carrying Bag to Store Accessories
$30.00 per 1 day(s)

LED - SOFTBOX for Aputure Nova P600C

Compatible with Nova P600c LED Soft Light Panel
$30.00 per 1 day(s)

LED - Spectrum Litemat 2L Full Color Kit

Litemat Spectrum 2L Full Color LED 1 - ballast 1 - head ext 1 - power cord 3 - diffusions - 1/4 stop - 1/2 stop - full stop 1 - mount 1 - remote 1 - speed ring 1 - grid
$150.00 per 1 day(s)

LED - Spectrum Litemat 4 Full Color Kit

Comes with: 1 - ballast 1 - head ext 1 - power cord 3 - diffusions - 1/4 stop - 1/2 stop - full stop 1 - mount 1 - remote 1 - speed ring 1 - grid
$175.00 per 1 day(s)

Light - 4’ Single Tube LED Bi-Color

- Operate on standard 120V AC - Adjustable 2700-6000 color temp
$15.00 per 1 day(s)

LiteGear Lite Ribbon Pro- Hybrid Commercial Kit - V.2

LiteRibbon Pro Kit-Commercial (Version 2) Kit Case: Pelican(TM) 1510 Case (1) LiteRibbon(R)VHO Pro: (1) 120-X2 High Density, 1.25 m (49.2 in.) (1) 120-X3 High Density, 1 m (39.4 in.) (1) 120-X6 High Density, 0.25 m (9.8 in.) (1) 60-X2 Low Density, 1.25 m (49.2 in.) (1) 60-X3 Low Density, 1 m (39.4 in.) (1) 60-X6 Low Density, 0.5 m (19.7 in.) (1) LiteRibbon(R) Chroma 120: (2) LiteStix (TM) Pro 15 cm (6 in.) (2) LiteStix(TM) Pro 30 cm (12 in.) (2) LitePower Packs (List of Accessories in Case) Additional Gear: (1) DTAP Battery Adapter (16) AA Batteries
$85.00 per 1 day(s)

Quasar QLED 4' Rainbow - 4 Light Kit

Quasar QLED 4' Rainbow/RGB 4 Light Kit Includes: - Case for Tubes and batteries - 4 - 4' Q-Rainbow Q50R - 4 - 100w Goal Zero A/C Batteries(Runtime at Max Power is 1.5 Hours per tube per battery) - 4 - Single MQ Mounts - 4 - Single Power Cables - 1 - 4 Tube Matthews MyWay Mount - 1 - 4 to 1 Connection cluster and Toggle switch cable
$300.00 per 1 day(s)

Quasar Q-LED Crossfade 2’ Bi-Color Tube

Quasar Q-LED Crossfade 2' Bi-Color -Single Tube -LED -includes Dimmer Baby pin mount available separately
$15.00 per 1 day(s)

Quasar Q-LED Crossfade 4’ Bi-Color Tube

Quasar Q-LED Crossfade 4' Bi-Color -Single Tube -LED -includes Dimmer Baby pin mount available separately
$20.00 per 1 day(s)

Quasar Q-Rainbow 2’ LED Tube

Quasar Q-LED R Rainbow - 2 Foot - Full RGB - 25 Watt Draw - built in dimmer - 8’ Power Cable - 0.22Amp @ 120v
$30.00 per 1 day(s)

Quasar Q-Rainbow 4’ LED Tube

Our Q-LED Rainbow Linear LED Lamp featuring RGBX can paint your world with vibrant saturated color and illuminate it with powerful white light from our 2000 Degree Candlelight to 6000 Degree Daylight Kelvin. All Rainbow Lamps are equipped with onboard digital interface giving you command of Intensity, Kelvin, Hue & Saturation. Each lamp has a built in Lumen Radio CRMX chip for wireless control.
$40.00 per 1 day(s)

Skypanel - (V-mount) battery Adapter

V-Mount Battery Adapter Plate for Skypanel S30 and S60. The V-Mount Battery Adapter for SkyPanel allows for the attachment of two V-Mount style batteries to the SkyPanel. With a short cable, the battery adapter makes the SkyPanel truly mobile. Both batteries are required to supply the correct voltage to the lamphead.
$30.00 per 1 day(s)

SkyPanel - ARRI SnapGrid 40 Deg for S120 FRONT OF SNAPBAG

- Controls Light Spill - Narrows Beam Angle to 40 Degrees - Attaches via Hook-and-Loop Fasteners - Folds Down for Storage
$40.00 per 1 day(s)

SkyPanel - S120 Light By ARRI

Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S120 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control. S120 Features: Fully Tuneable from 2,800 K to 10,000 K Vibrant Color Selection (RGB+W Color Gamut) High Color Rendering Large Aperture (1290 x 300 mm) Perfect for Vertical Lighting Low Power Consumption (400 W Nominal) Tremendous Output - Brighter than 2kW Tungsten Soft Light Fully Dimmable from 0 to 100 % Lightweight and Compact Beautiful Soft Beam of Light Interchangeable Diffusion Panels Wide Range of Accessories Available Thin Profile On-Board Battery Connection (23 - 36V DC) Onboard Simple Control Panel Onboard DMX In and Out RDM Implementation USB-A Connection for Firmware Updates EtherCon port for network connectivity Fan Mode Selection
$250.00 per 1 day(s)

SkyPanel - S60 Light By ARRI

ARRI SkyPanel S60-C LED Softlight: - 1’ x 2’ Panel Surface - 115 Degree Beam Spread - Color Temperature range from 2,800 to 10,000K - 0 to 100% Dimming. - DMX Control - Hue and Saturation Control - Range of Full Minus to Full Plus Green - Optional Accessories o Battery Powered o Speedring o Chimera o 60 Degree Honeycomb o Center Mount Yoke
$125.00 per 1 day(s)

Astera - Art7 AsteraBox CRMX

AsteraBox CRMX is the interface between lights and controller. It can be used as a wireless DMX transmitter with CRMX technology and also works as interface between app and lights. Its built-in battery enables an easy and time-saving setup, just like with all of Astera’s products.
$50.00 per 1 day(s)

LED - Aputure Spotlight Mount

Achieve a greater degree of control with the Spotlight Mount’s internal shutter blades for sharp cuts. Also offers simple user-interchangeability between Aputure’s 19°, 26°, and 36° lenses. Combined with the internal shutters, filmmakers will be able to gain more control of the shape of their light. Lenses come separately.
$30.00 per 1 day(s)

LED - Aputure Lens - 19 Deg Spotlight

Aputure Spotlight - Lens 26 Degree - Requires the Aputure Spotlight Mount
$20.00 per 1 day(s)

LED - Aputure Lens - 26 Deg Spotlight

Aputure Spotlight - Lens 26 Degree - Requires the Aputure Spotlight Mount
$20.00 per 1 day(s)

LED - Aputure - Iris

$8.00 per 1 day(s)

LED - Aputure LS 1200D Pro Daylight

The Aputure LS 1200d Pro Light Storm Daylight LED Light is Aputure's flagship Light Storm Product. Featuring a 1200W COB, the LS 1200d Pro is both the brightest light in the entire Aputure product line, as well as the highest output Bowens Mount light fixture on the market. To optimize its output, the LS 1200d Pro includes three Bowens Mount Hyper Reflectors with varying beam angles: Narrow, Medium, & Wide. With its Narrow Hyper Reflector, the 1200d Pro can achieve an output of 83,100 lux at a distance of 3meters. By designing the LS 1200d Pro to utilize the Bowens Mount, the Light Storm flagship can also use a wide array of Bowens Mount soft light modifiers such as Light Domes and Lanterns. As a professional Light Storm fixture, the LS 1200d Pro utilizes a weather-resistant construction to withstand inclement weather. Its connectivity is also designed with lighting technicians in mind. The 1200d Pro uses Lumen radio CRMX and Art-net & sACN via an etherCON connector, in addition to the 5-Pin DMX512 ports, to seamlessly integrate into any professional DMX interface. The LS 1200d Pro also makes battery operation possible for high output fixtures by integrating two 48V/15A DC inputs for half or full power so that users can operate the 1200d Pro without noisy generators. FEATURES: 83,100 lux @ 3m with Hyper Reflector (Narrow) 22,400 lux @ 3m with Hyper Reflector (Medium) 9,610 lux @ 3m with Hyper Reflector (Wide) 1200W Daylight Bowens Mount Point-Source LED 5600K Daylight CCT Optimized Output with 3 Hyper Reflectors: Narrow (15°), Medium (30°), Wide (55° )
$225.00 per 1 day(s)

LED - Aputure - Accent B7C 8- Light Kit

Power Input 100V~240V AC Power Cable Type 3-Pin AC Power Cable Length 1.2m Max Power Draw ≤100w Socket Connector E27 Fuse Type 3A Dimensions 35.8*28.4*16.7cm / 14.09*11.2*6.59in Weight (Empty) 3304g / 7.28lb Weight (Full) 5200g / 11.46lb 8 - Tubes 1 - Case 1 - power cord
$75.00 per 1 day(s)

LED - Astera FP5 NYX 8 x PowerStation Set with Accessories

Astera FP-5 PS SET The kit includes: 8 x PowerStations 8 x PowerStation Hangers 8 x TrackPins 8 x lamp sockets 8 x Bridge Cables 1 x PSU 1 x DC SplitCable.
$85.00 per 1 day(s)

LED - Aputure Mini Zoom for 60X

Zoom Projection Lens Accessory for Aputure LS 60d & LS 60x 15°~30° 2x Zoom Adjustable Focus Projection Lens Precision Chromatic Aberration-Free Optics Accepts M-Size Gobos 1.4m-2.8m Diameter Illumination Circle at a 5m Distance Even Light Distribution (Over 80% Edge-to-Edge Consistent Illuminance) Internal Zooming Mechanism
$50.00 per 1 day(s)

Dedolight - 85mm Projection Lens

$50.00 per 1 day(s)