Grip

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Double Sided Stepladders - Fiberglass Series FD1A Type 1A - 300 lb. Load Capacity Double Sided Fiberglass Stepladder Type 1A 300 lb Load Capacity Stepladder Step Ladder Features: Massive Steel Top Plates Orange Side Rails All Steel Rivet Construction Heavy Duty Steel Braces Weather resistant for outdoor use ANSI and OSHA compliant for safety

Type - 300 lb. Weather resistant for outdoor use ANSI and OSHA compliant for safety

All white wooden prop ladder. Not to be used as a regular ladder, for prop purposes only.

All white wooden prop ladder. Not to be used as a regular ladder, for prop purposes only.

Lead weight able to be submerged in water Dimensions: 1” x 5”

Weight that can be submerged into water.

Weight: 5lbs Socket Size: 1 1/8 inches Spigot Size: 1 1/8" inches Designed to convert a Junior Stand to and overhead stand, the D400 incorporates a 4 1/2" grip head with a junior (1 1/8") stud and receiver.

The must-have camera stud for your super clamp. Powerful, yet compact. This stud can be fitted into the Super Clamp 035 socket, enabling you to mount your camera directly or attach the head. By keeping the super clamp flush to the ball head, you'll always know it's the right stud for your equipment.

A U-Hook bracket that can be used to hang cables; or, when used in pairs, to suspend tubes, pipes, backgrounds, or even to support a horizontal Matthpole.

The strong jaw clamps onto pipes and round tubing alike, with heavy duty rubber gripping pads securely fixed to the jaw to provide that extra friction needed to keep the clamp from slipping.

Our Manfrotto Variable Friction Magic Arm with Quick Release is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. Its camera platform has a quick release mechanism and removable camera plate. The camera plate has a 1/4"-20 thread.

Unique grip tool with a 5/8" pin attached to the ball joint that pivots from -15° to +90° while the collar rotates 360°. All axis lock positively with one locking handle.

The MQ Mount is designed to securely hold T-12 LED fixtures with minimal or no light loss. The mount terminates to an industry standard 3/8” pin which can be used with any industry grip head. The 3/8” pin is knurled to prevent unwanted rotation and is internally tapped ¼”-20 to expand its length and rigging capabilities. part#420114 Key Features: Jaws designed for T-12 LED light tubes Knurled 3/8” pin compatible with all grip heads, including 2.5”, 4.5”, mini and microgrip heads. Tapped ¼”-20 pin for expanded rigging and expanded length. Manufactured from lightweight, high impact plastic and aluminum parts.

The Meat Axe incorporates a uniquely designed Grip Head with simultaneous 3-axis adjustment. Will support any size Meat Axe Flag or conventional Scrims or Cutters. Unquestionably the strongest device of its kind available.

The Meat Axe incorporates a uniquely designed Grip Head with simultaneous 3-axis adjustment. Will support any size Meat Axe Flag or conventional Scrims or Cutters. Unquestionably the strongest device of its kind available.

Uses baby (5/8") pipe to span a room or structure to create a lighting grid in any room. Used to hang light weight lights, flags, silks, etc.

Baby pin on plate.

Junior Receiver on a plate.

5/8″ Pin to 3/8″ Pin

Mounts on a baby stand with 5/8" diameter stud. Has (2) studs top and bottow. Allows you to offset the light fixture 14", great for getting into tight spaces or over the camera lens.

Offset Arms are a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set.

3ft tall scaffolding. We send ours out with posts and railings. We also rent wheels, leveling jacks and cat walks 5’ x 5’ square x 3’ tall (Can stack up to 12' tall) **These are not painter scaffolding.

Ours come in the following dimensions: 5’ x 5’ square x 3’ tall (Can stack up to 12' tall) 5’ x 5’ square x 6’ tall (Can stack up to 12' or 2 sets of parallels) We send ours out with posts and railings. We also rent wheels, leveling jacks and cat walks **These are not painter scaffolding.

Parallel casters are wheels that come in a set of 4.

Leveling jack with casters are used to adjust the height of the parallels in small amounts to level out parallels. Attached are wheels in a set of 4.

Leveling jacks are used to adjust the height of the parallels to level out the parallels.

Pelican clamp gets its name from its profile and its ability to open wide and hold a lot. This clamp can grip onto a pipe hold a lot of weight.

Has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture attached, while the bolt is being tightened.

Has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture attached, while the bolt is being tightened. Terminates in a Junior Receiver and has a safety chain and cotter pin attached.

Used to create a pulley system.

Used to create a pulley system.

Used to create a pulley system.

Ours measure 2’ x 2’. We carry a silver reflector and a mirrored reflector. - The silver reflector is one side shiny silver paper and one side silver leaf (hard side/soft side). - The mirrored reflector is one side mirror and one side shiny silver paper. -Reflector can be pivoted. -Reflector has a baby receiver so it will fit a 5/8” baby pin. -We send ours out in a wood box.

Ours measure 2’ x 2’. We carry a silver reflector and a mirrored reflector. - The silver reflector is one side shiny silver paper and one side silver leaf (hard side/soft side). - The mirrored reflector is one side mirror and one side shiny silver paper. -Reflector can be pivoted. -Reflector has a baby receiver so it will fit a 5/8” baby pin. -We send ours out in a wood box.

Ours measure 42” x 42”. One side is a mirror and the other side is silver paper (hard silver reflector). Reflector can be pivoted. Reflector mounts in a combo stand which is included in the rental. We send ours out in a wood box.

Ours measure 42” x 42” One side is a mirror and the other side is silver paper (hard silver reflector) Reflector can be pivoted. Reflector mounts in a combo stand which is included in the rental. We send ours out in a wood box.

Manufactured by Matthews, this reflector is 75% lighter than a standard reflector. Ours measure 40” x 40”. We carry the standard silver and super soft silver. Ours go out with either a yoke to allow for pivoting or a polito bracket. Stand is not included.

Allows a junior mounting point to have a 3 foot extension. Weight: 4 lbs Height: 44″ Width: 6″

Strong metal wire used to secure and provide added protection to hanging lights.

20lb Black Vinyl Sandbags. Water resistant but not waterproof Has metal hook for securing to canopy legs

Our seamless is ideal for the photographer on the go. The stand is lightweight and compact, with the ability to collapse down for easy travel. The stands are designed to safely support 9' rolls of seamless paper, as well as cloth backgrounds as heavy as muslin. 2 - stands 4 - poles 1 - bag 2 - top knobs

Black cordura nylon with handle.

5ft aluminum tubing with inner connector.

6ft aluminum tubing with inner connector.

For 1 1/4 inch speedrail.

For 1 1/4 inch speedrail

For 1 1/4 inch speedrail.

For 1 1/4 inch speedrail. You can adjust the angle.

Steel clamp welded to a swivel d-ring. Works with 1-1/4" or 1-1/2" Schedule 40 aluminum Speed-Rail®.

18 inch sleeve connector.

Speedrail connector with Ear.

For 1 1/4 inch speedrail.

For 1 1/4 inch speedrail.

For 1 1/4 inch speedrail. This is a fixed connector.

Aluminum tubing 1 1/4” diameter

Aluminum tubing 1 1/4” diameter

Aluminum tubing 1 1/4” diameter

Aluminum tubing 1 1/4” diameter

Aluminum tubing 1 1/4” diameter

Aluminum tubing 1 1/4” diameter