Boom Arm - MAX Menace Arm Kit

MAX can be positioned flush against a wall, into or around a corner. MAX works below the horizontal thus eliminating the need for scaffolding. MAX can be positioned parallel up to a 10' (305cm) ceiling. 16' (487cm) extension without adapter. 17.5' (533cm) extension with adapter. Self-leveling head with Baby Pin and Junior Receiver. Fast and easy setup or tear down. Easily movable at full extension on level surfaces. Angles are adjustable with light fixture attached. Use for lights, flags, frames, branch holders or even cameras. 3:1 weight ratio Features and Benefits Self Leveling head w/ baby pin and junior reciever Staight tracking, multi-direction locking, non-marking Tente casters. Best braking casters available. Weight Without Counterweights- 215 lb. With Counterweights- 465 lb.
SKU: 2361
/day or weekend
/week

Weekends Count as One day.

One-day minimum.

Rent 4-6 days per week,pay only for 3!

1 Week @ $600.00
1 Day @ $200.00

$200.00

i h

A prestigious award well deserved; MAX will support lighting fixtures up to 175 pounds (80kg) allowing you to place almost any lighting almost anywhere on set - back lights, over set walls and in places where lifts are restricted such as roof tops, balconies, etc. MAX will support a 75lb (34kg) light fixture up to 17.5ft (533cm) on the horizontal and over 20ft (609cm) in elevation. MAX's horizontal plane can be adjusted from 7-10ft (213-305cm) and at an extension of 8ft (244cm) has a capacity of 175lbs (80kg). MAX can be counterbalanced with either shot or sand bags and by using standard weight plates MAX can be moved around easily on flat, level surfaces.

Weight: 215lbs (98kg)

  • MAX can be positioned flush against a wall, into or around a corner.
  • MAX works below the horizontal thus eliminating the need for scaffolding.
  • MAX can be positioned parallel up to a 10' (305cm) ceiling.
  • 16' (487cm) extension without adapter. 17.5' (533cm) extension with adapter.
  • Self-leveling head with Baby Pin and Junior Receiver.
  • Fast and easy setup or tear down.
  • Easily movable at full extension on level surfaces.
  • Angles are adjustable with light fixture attached.
  • Use for lights, flags, frames, branch holders or even cameras.
  • 3:1 weight ratio
Customers who bought this item also bought
Picture of Truss - 10’ Truss Section - 12” Box Truss

Truss - 10’ Truss Section - 12” Box Truss

12”x 12” square box truss, 10ft in length
$20.00 per 1 day(s)
Picture of Boom Arm - MAX Menace Arm EXTENSION 6’

Boom Arm - MAX Menace Arm EXTENSION 6’

$50.00 per 1 day(s)
Picture of Truss Holder - Connector For Truss To Stands

Truss Holder - Connector For Truss To Stands

Connect square truss to stand with jr. pin
$12.50 per 1 day(s)
Picture of Stand - Crankovator B140 by Avenger

Stand - Crankovator B140 by Avenger

Our Crankovator stand meets the industry's requirements for extra safe operation with heavy loads. It includes a ratcheted crank handle and solid braked wheels, but does not include a stand adapter. It allows mounting of a large fixture that has a 1-1/8" (Junior) stud. - Easy to raise and lower - Includes a ratchet crank handle - Double safety with direct drive gear and secondary safety lock, no pulleys or cables - Solid braked wheels self-adjust to required position -Load Capacity 154.32 lb / 70 kg -Max Height 15.25’
$90.00 per 1 day(s)