Strobe Packs

Profoto B10X Plus Ten times the power of a speedlight all packed into the size of a large camera lens. Flash power: 500 Ws Continuous light: 3250 lumens Flash recycling: 0.05-2.2 seconds Battery capacity: 200 full power flashes Total weight: 1.9 kg / 4.2 lbs Diameter: 10cm / 3.9" Length: 23.5cm / 9.3"

500Ws Light, 40W LED Modeling Lamp 220 Full Power Flashes, TTL Output: 1700 Lux at 3.3' (Bare Bulb) Smooth Dimming from 100 to 1% Built-In AirX Connectivity; 2.4 GHz 0.01 to 2.1 Sec Recycling (Boost/Freeze) 11-Stop Power Range; 0.5 to 500Ws 90-Minute Battery Charging Time

The Pro-B4 is a state of the art battery pack that in some regards outperforms even the best studio packs out there. It’s a revolution on location and unique in that it’s a battery pack that can freeze motion at 1/25,000 a second and fire up to 30 flashes in a second. Features: -Very short flash durations on all power settings. -Selectable FREEZE mode available for extreme splash shots. -The world’s fastest recycling battery pack allowing you to create never before seen sequence shots on location. -Li-Ion (LiFe) battery recharges to full power in only 45 minutes. -Battery can be charged while in use, which makes the pack equally useful in the studio. -Two individual outputs and 11 f-stop power range with control in 0.1 f-stop steps provides unbeaten precision and versatility on location. -Can be wirelessly controlled from up to a 300 m range with any optional Air Remote.

Profoto Pro-10 Features 2400Ws with two outlets individually adjustable in 1/10 f-stop increments over an 11 f-stop power range Bursts up to 50 flashes per second with flash durations up to 1/80,000 of a second. High-resolution display with a superior, intuitive interface with large dials. Fully integrated with all Profoto Air and AirTTL camera remotes. Recycle time: 0.02-0.7s. Flash duration (t0.5): 1/80,000-1/800s*sec. *Comparable with 1/2,000s (t0.5) in conventional studio flashes. High Speed Sync up to 1/8,000s Shoot in TTL or manual mode. Firmware upgrades from Profoto installs easily via built-in USB port. Compatible with 11 different flash heads and 120+ Light Shaping Tools from Profoto's renowned light shaping system

Uses OCF Attacments -1000W -Not Battery Powered 2 x Power Cords, 1 x Padded Bag 0.03-1.2 Sec Recycling Built-In AirTTL Radio Receiver 1/50,000 Sec Freeze Mode Flash Duration Quick Burst: Up to 20 Frames per Second 10-Stop Power Range: 2-1000Ws High Speed Sync to 1/8000 Sec 300W Modeling Lamp 100-240 VAC

Uses Proforo Attachments -1250W -Not Battery Powered Wattseconds :1250 Ws Recycle Time: 0.01 to 0.8 Sec (Full Power) Modeling Light: 56 W LED Built-In Flash Ready Indicator: Audio & Visual Voltage: 100 to 240 VAC, 50 / 60 Hz Weight: 7.9 lb / 3.6 kg Dimensions: 13.6 x 7.9 x 5.1" / 34.5 x 20 x 13 cm Flash Duration: t.5: 1/62,000 Sec Color Temperature: 6100 to 9000K

Pro-B3 Battery (4S2P) A spare battery for Pro-B3 Product number: 100444 Flashes per battery @ full charge: ~250 Flashes The last thing you need when shooting on location is to run out of battery. With a spare Pro-B3 battery you will get plenty of extra runtime. Fully charged you’ll get 250 flashes on full power. The battery can be clicked on and off the flash in seconds and the charge level indicator on the battery makes it easy to check the charge level. Recharged quickly with the Profoto Battery Charger 5A Our batteries are UN-certified so you can take them with you on your travel. All documentation you need can be found under the download tab. Features Clicks on or off in seconds Lithium-Ion battery technology Provides 250 full power flashes Charge level indicator on battery Charges in less than 90 minutes with Battery Charger 5A Can be charged while in use

Battery Charger 5A Standard charger for the Pro-B3 battery Product number: 100445-US Standard battery charger for the Pro-B3 battery. Recharges the battery in less than 90 minutes. A charge status LED lets you know when the charging is ready. The charger can be plugged into the battery while the flash is in use to prolong battery runtime. Features Charges the Pro-B3 battery in less than 90 minutes Can be charged while in use to prolong battery runtime