A quick and easy way to create a on location lighting grid. End cup (non adjusting) mounts on one end of 2x4 and the Adjustable End Cub mounts on the other end. End cups must press against wall studs, then just turn adjuster to expand an put pressure against wall studs. Wall Spreader should be properly secured with back up safety cables or chains before mounting lights.
A durable and strong stand with the ability to handle medium sized lights. Equipped w/ Leveling Leg & Wheels Weight: 20 lbs Folded Height: 50″ Max Height: 152.5″ Width: 6″
Our Avenger stand with Folding Base is a heavy-duty, chrome-plated, steel and aluminum alloy support that features a low base for extra stability, braking wheels, two risers, and a 5/8" Baby stud. The legs fold up for transport and storage. Weight Limit: 25lbs
- Set of 3 robust 5" diameter wheels - Two-Way locking levers - Features a locking system which does not require any receiving hole in the leg - Wheels are easy to install and remove
Our Crankovator stand meets the industry's requirements for extra safe operation with heavy loads. It includes a ratcheted crank handle and solid braked wheels, but does not include a stand adapter. It allows mounting of a large fixture that has a 1-1/8" (Junior) stud. - Easy to raise and lower - Includes a ratchet crank handle - Double safety with direct drive gear and secondary safety lock, no pulleys or cables - Solid braked wheels self-adjust to required position -Load Capacity 154.32 lb / 70 kg -Max Height 15.25’
This is an industry standard rolling stand. Here are the details: • We canny both Norms and Matthews brands • Made of heavy duty steel • All have rolling bases and come with a junior receiver and a 4.5" grip head (lollipop) • The Hi Hi Roller measures 7' collapsed and 20' fully extended. Max Ht: 249” (6325mm) Min Ht: 84" (2143mm) Capacity: 88lbs. (40kg) Weight: 43lbs (20kg) Footprint: 60" (1524mm) Folded Base: 16" (406mm)
The Junior Long John Silver Stand is a heavy duty stand with made from steel for supporting large lights. The stand has leveling legs that compensate for marginal differences in ground level. Max Height: 11’ Weight Load: 230lbs
Yet another option when choosing a stand. Here are the details: -Made of lightweight aluminum -used for strobe head or small light -This stand has 3 risers and a 5/8 Baby Pin -Measures 34” in height when collapsed and 96” fully extended. -Weighs approx 10lbs
The Avenger Long John Silver Stand is a heavy duty stand with made from steel for supporting large lights. The stand has leveling legs that compensate for marginal differences in ground level. Weight Load: 250lbs Height: 18’
The classic Hollywood stand. Here are the details: • We carry both Norms and Matthews brands. Made of steel. • We send ours out with an arm and a head (lollipop). Max Ht: 63”" (161cm) Min Ht: 30" (76cm) Capacity: 22lbs. (10kg) Weight: 8.25lbs (4kg) Footprint: 27.5" (70cm) Folded Base: 21" (54cm)
Our basic stand with a Jr. receiver. Here are the details: • We carry Norms combo stands • Made of steel • These stands have rocky mountain legs and come with either 2 or 3 risers • Ours do not come with wheels but we have wheels available to rent for an additional fee Max Height: 76.5" (1943mm) Min Height: 33.5" (851mm) Capacity: 72lbs (33kg) Weight: 16lbs (7kg) Footprint: 31" (787mm) Folded Base: 4" (102mm)
Our roller features an all-metal construction with cushioned rubber rings on the risers to safeguard your gear from unnecessary bumps and vibration. The optimal wingspan on the base and locking wheels ensure the stand will remain stable and upright. Load Capacity: 55 lb Maximum Working Height: 71" Minimum Working Height: 37.5" Weight: 15.3 lb
- Set of 3 robust 5" diameter wheels - Two-Way locking levers - Features a locking system which does not require any receiving hole in the leg - Wheels are easy to install and remove
Heavy duty and rugged, these all-aluminum stands can withstand the rigors of location shooting. These stands are made with square tubular legs for additional strength. They are available with a Rocky Mountain leg for easy leveling on uneven terrain.
-2 riser extends to 13' high 1 x Crank & Wind-Up Stand Maximum Working Height 12' / 3.6 m Minimum Working Height 5.1' / 1.5 m Load Capacity 176 lb / 80 kg Closed Length 5.9' / 1.8 m -Pneumatic wheels
This is the lowest stand we carry and is used quite frequently as the base for a stand. Here are the details: • Made of steel • Has a Jr receiver • Ours can come with or without wheels • They measure approx 12” in height
This is the lowest stand we carry and is used quite frequently as the base for a stand. Here are the details: • Made of steel • Has a Jr receiver • Ours can come with or without wheels • They measure approx 12” in height
This suction cup mount uses a 5.8" (15 cm) suction cup to adhere to any flat non-porous surface. It's best suited for holding small lights, lightweight cameras, scrims, flags or articulated arms.
Unlike most other ball head mounts which are manufactured from die cast components, the Matthews BH-30 Ball Head with 10" (25cm) Suction Cup Mount we carry is individually CNC machined from solid bar stock to ensure precise control over all critical dimensions and elements.
Our swivel pin suction cup uses a 5.8" (15 cm) suction cup to adhere to any flat non-porous surface. It features a ball-joint socket which rotates within a half hemisphere. It's best suited for holding small lights, small lightweight cameras, scrims, and flags.
A sweep table is ideal to use when photographing products. Our sweep table measures 4’ x 8’ and is slightly over 3’ tall. We send ours out with a 4’ x 8’ sheet of milk glass plexiglass.
Full Package includes the following: 2 Full Apple Boxes 2 Half Apple Boxes 2 Quarter Apple Boxes 2 Pancake Boxes 6 Regular C - Stands 2 Low C - Stands 2 Reg. Combo Stands w/Pin 4 Baby Plates 2 Jr. Plates 2 Mafer Clamps 2 Lollipops 12 Wedges w/Box 6 2 x 4 Cribbing 6 #20 Shotbags 4 24 x 36 Solids 2 24 x 36 Singles 2 24 x 36 Doubles 2 24 x 36 Silks 4 18 x 24 Solids 2 18 x 24 Singles 2 18 x 24 Doubles 2 18 x 24 Silks, with Flag Cage
Our tree branch holder safely enables the use of a real tree branch instead of a cello or wood cookie. Allowing for natural branch movement, it also hides a multitude of problems when placed in the foreground of a shot, or should the shot require, coming in from the side. Weight: 3.5 lbs Height: 16″ Width: 8″
This handy adapter allows you to mount multiple light fixtures or accessories onto a single stand. It features five baby studs with embossed necks welded onto sturdy steel and offset for mounting five lights. Can be mounted on the stand top of a baby stud (16mm) or fit into a junior receiver (28mm).
This handy adapter allows you to mount multiple light fixtures or accessories onto a single stand. It features five baby studs with embossed necks welded onto sturdy steel and offset for mounting five lights. Can be mounted on the stand top of a baby stud (16mm) or fit into a junior receiver (28mm).
Designed to hang on a set wall Retaining arms adjust to the thickness of set wall for security 90 degree offset Telescopes in two sections Telescopes 18" to 48"
A quick and easy way to create a on location lighting grid. End cup (non adjusting) mounts on one end of 2x4 and the Adjustable End Cub mounts on the other end. End cups must press against wall studs, then just turn adjuster to expand an put pressure against wall studs. Wall Spreader should be properly secured with back up safety cables or chains before mounting lights.